ESP32 POE LAN Gateway

Hi, feel free to bid if you have experience with ESP32,LAN8720,POE 1. Description of the device LAN / POE gateway based on the following components: - LAN8720 - ESP32-WROOM-32D / ESP32-WROOM-32E (pin compatible) - The POE module should be an option, from the widely available modules from Aliexpress, but if there is enough space to be included in the PCB, then by default. An example of modules available on Aliexpress: DP9700-5V, DP9900, DP1435, RT9400 - Expansion board based on mini PCIE or 2x6 pin connector on both sides for good fixing. 2. Technical requirements - Power supply via Micro-USB and POE optional. - DC power supply 3 V, 1-2 A, It is advisable to use a DC-DC converter from 5V to 3V. - Dimensions of passive components starting from 0603. - the components used in the PCB must be available on [login to view URL] for SMT assembly, preferably in the base category. - Output pins ESP32 UART1 (RX & TX) or UART2 (RX & TX), depending on availability, to the expansion board. Including also VCC, GND also 2+ any GPIOs, if possible, then all available GPIOs go to the expansion board - Jumpers required to select between ESP UART and UART expansion board. - The button used on the PCB should restart the module (RST) and also get a contact on the expansion board. 3. Schematic examples - [login to view URL] - [login to view URL] - [login to view URL] - [login to view URL] 4. Example of finished devices - WT32-ETH01, NO POE - China Example, Folder - China Example, there are pictures and a diagram of the device. 5. Arrangement of elements on the board, Sample [login to view URL], Sample [login to view URL]