Part Time Imperial AutoCAD Architectural Draftsman – Min 5 Yrs Building Project Experienced ONLY
Employment Requirements :
DO NOT ATTEMPT TO APPLY IF YOU CANNOT COMPLY WITH "ALL" REQUIREMENTS BELOW ESPECIALLY SKILL TEST :
Applicant Must have an AutoCad Drafting experience for at least 5 yrs working in Architect's office or worked on Architectural building Projects.
Applicant Must know how to work with X-references Extensively. DO NOT ATTEMPT TO APPLY W/O EXTENSIVE KNOWLEDGE IN XREFS.
Applicant Must know Paper Space Presentation and Viewports using different scales.
Applicant will Required to submit Resume & Work Sample.
Applicant need to submit (if possible and more preferable) Complete Sample of Construction Document Drawing set submitted to Building Department for Building Permit Application. The Drawings if possible composed of: SITE PLAN, GENERAL NOTE, CONSTRUCTION PLANS, ELEVATIONS, BUILDING SECTIONS, DETAILS, CONSTRUCTION SPECIFICATIONS, ELECTRICAL PLANS, MECHANICAL PLANS, PLUMBING PLANS and OTHER DRAWINGS REQUIRED to acquire Building Permit.
Applicant will also asked to submit; Work sample using XREF file attachment application technique, Work sample using Paper Space Layout presentation with Title Block, Work sample using different scales presented in various viewports using different Scaled Drawings.
APPLICANT WILL UNDERTAKE SKILL TEST AND WILL GET PAID FOR “”$30.00”” IF PASSED THE LAYOUT OF EXISTING BUILDING CONDITION AND DESIGN TEST STATED BELOW:
Applicant will undertake SKILL TEST IN: ARHITECTURAL AUTOCAD DRAFTING TEST USING XREFS, ARCHITECTURAL BUILDING & CONSTRUCTION DESIGN TEST, ARCHITECTURAL DRAWING DETAIL TEST & COMPREHENSION TEST.
Applicant will Draw Existing Condition of the Existing Building such as: Site Plan, Floor Plans, Roof Plan, 2-Building Ssctions, & 4-Elevations. Applicant will refer on Pictures and Hand Sketches in Developing & Drawing of Existing Building Conditions.
After the Test in Drawing of Existing Building Conditions, Applicant will undertake Design Test to Develop a DESIGN & CONSTRUCTION DRAWINGS of Existing Building. References will be given during Test.
Applicant will then be hired after PASSING the test & will be given an opportunity to work as per project availabity.
The work is "VERY FAST PHASE & TIME PRESSURE". Drawings need to be finished as Fast & Efficient as you can or as required and If possible only by hours. Delay and prolongation of work will get negative result on your salary and will be adjusted accordingly.
Please take note that ""THIS IS REQUIRED & VERY IMPORTANT"" Must be able to coordinate work using Yahoo Messenger or Skype voice conferencing using ""MICROPHONE"". Feature like Chat conferencing & “YAHOO DOODLE” will also be used during Drafting of Projects. If you cannot be able to coordinate using these Yahoo features there is """NO NEED TO APPLY FOR EMPLOYMENT""".
Salary Requirements:
SALARY WILL BE NEGOTIABLE & Per Package Layout basis from $20.00 to 150.00 defending on the complexity of the Details, and again based on how you learn to execute my Drawing Techniques and Preparation.
The offered salary will only be given to you 100% without any salary deduction if ; You are not making redundant or repetitive mistakes, If you can understand & follow Instructions correctly, if you use your own style of Drafting & Standards instead of the given Style of Drafting & Standards.
Salary will also based on your Technical Know How, Your Familiarity with my Project Needs & Requirements, Speed of your Drafting work, Drafting skill, How you follow Instructions correctly and not making repetitive & Redundant mistakes, If you Do not make mistake twice, If you have good determination & evaluation of project needs & requirements.
There will be a """SALARY DEDUCTIONS""" when you did not copy exactly “ALL” the Notes and Information on given ''Sketch Survey Images or Checkmarks Images''. ****SEE ATTACHEMENT FOR MORE SALARY REQUIREMENTS****
Dear Sir, I am applying for the Imperial AutoCAD Architectural Draftsman position. Please read additional info in the personal message box. Sincerely, Vanja
Hi, my name is Miguel Alonso and I am a licensed General Contractor and Architect based out of W. Palm Beach. I have extensive residential design / build experience with proficiency in FBC (Florida Building Code) and ICC. I have read through your project description and understand your payment terms. Further I understand the quality of drawings you are looking for within the format you layering you require.
Personally, I have been involved in architecture for over 10 years with a primary focus on custom residential homes. I have a BA in Architecture and recently went back to school to complete my professional degree for licensure. In addition, for the last 5 years I have been a custom home builder and permit holder with over 30 projects completed ranging in scope from $125,000 to over $1.25M. I only mention this experience as a builder as this time spent on the field as greatly improved my construction docs. The plans I present now are clear, accurate, and go through the South Florida building departments with a minimum of comments if any. These building departments are notoriously difficult due to the FBC and the high wind requirements.
In conclusion, I hope that you let me take your test as you can see that my skills and knowledge are up top notch. In addition to developing architectural sets I also do all my own MEP and Structural drawings. As per your request I have submitted a full set of construction docs for your review. This was a most recent project that has gone through the building department.
Enclosed please find a recent project that has gone through the palm beach county building department. This project also includes the xrefs which I also use. I do not have any viewports as I just scale in model space and I don't personally use them but I do know how to provide them with no issue.
I am a Senior designer and draftsperson, worked for mining company and Oil & gas company with extensive knowledge of drating standards and exreferene method of drating.
Hi, I'm nishan from Nepal and i have been
working as a draftperson for 5 years in an Building related engineering cosultancy. And i am sure that i can do yours job more pecisely.
To whom it may concern,
I believe you would be quite happy with the services my firm could offer you. I would appreciate your correspondence with me regarding this. I personally have over a decade of experience doing exactly what you are looking for. I have and am working with Architects in my local area. I am also very used to Q & A and will not have a problem meeting your standards.
Please view my resume and example work attached here. Please bear in mind I have much more complex examples available, if required
Thanks for your time,
Joseph Cockroft
I have more then 45-years.... That why I not need any test.......
I am Consultant & CAD service provider form Pakistan. I am highly skilled & qualified Professional with more than 45-years extensive experience in field of Mechanical, Electrical, Civil & Architectural and structural design & drawings & more than 25-years as CAD service provider. I also have highly professional team with me, work under me & we produces very professional results. We also help to customize AutoCAD by Designing Block Library, Shapes, fonts & Hatches & by using AutoLIPS programming to customizing the AuoCAD.
Electric & Mechanical Design/Drafting Services (On CAD Software), for Buildings and Industries. in following disiplains:
a. Plant Layout, Electric, HVAC & Plumbing Layouts.
b. Manufacturing Facility Engineering Drawing.
c. Plant upgrade drawings.
d. Parts and Assembly Modeling.
e. Exploded views of Assemblies.
f. Piping Layouts, Isometrics, Detailing of Vessels.
g. Plant upgrade drawings
I can transform your Old paper engineering drawing into clean, easy to read, computer-generated drawings. I can reproduce Not To Scale & with scale. Raster to Vector Conversion. We have done such many jobs before & will produce professional results.
Try me
Regards
Your
Muhammad Rafiq Bin Aziz
hi.. am an egyption girl,,interior designer and i have many certifcations ma degree is excellent ...like to be team wz u i have an experience in it since 6 years..regards
Great job I'm interest to join to your team, experience 3 years steel construction, 4 years high rise building, 4 years power plant in engineering services. Waiting your invitation for testing. Mechanical plumbing, hvac system, architecture, electrical etc.
Are you looking for an AutoCAD designer/drafter with:
o Fifteen years of hands-on experience in AutoCAD with a strong architecture background?
o Knowledge of the latest technology in 3-D and 2-D design?
o Excellent written and oral communication skills?
o A passion to learn and to increase his skills?
If so, then you need look no further. You will see from my enclosed resume that I meet all of these qualifications and more.