Gsm rfid arduinotrabajos

I am looking for an experienced Arduino developer to create a code for my project. The main functionalities that I need the code to have include LED control, sensor data collection, and motor control. Specifically, I need an Arduino Uno board to control 8 relays in a sequence with a push button start. The ideal candidate should have: - Strong experience in Arduino programming - Knowledge of controlling relays and sensors with Arduino - Familiarity with LED control and motor control using Arduino The project needs to be completed within a week, so the candidate should be able to work efficiently and deliver the code on time. If you are confident in your Arduino skills and have the necessary experience, please submit your proposal with relevant ...

I am looking for a programmer who can program an esp32 microcontroller using Arduino programming language. The specific functionality I desire for the esp32 is communication. Ideal skills and experience for this job include: - Proficiency in Arduino programming language - Experience in programming esp32 microcontrollers - Knowledge of communication protocols and techniques for esp32 devices. The main goal of this project is to develop a program that enables the esp32 to communicate with other devices or systems. The programmer should be able to implement reliable and efficient communication protocols, such as WiFi or Bluetooth, to facilitate data exchange. Key requirements for the project: - Develop a program for the esp32 that enables communication with other devices or ...

I will need Arduino programming, consulting how to do the schematics and integration with Android phone. Sensor data should be taken from the same Android phone. Full specification is attached. If you want to do it, I would like to have video call with you first to answer your questions regarding the project. I already have some necessary equipment, but I am willing to purchase any additional equipment required for the project. If you have the necessary skills and experience, and can complete the project within the specified timeline, please reach out to discuss further details.

Arduino LoRa programing assistance needed for code writing and debugging, including assistance with wiring and setup. Intended use: Sensor Monitoring Deadline: Within 1 week Skills and experience required: - Strong proficiency in Arduino programming - In-depth knowledge of LoRa communication protocol - Experience with sensor integration and data transmission - Ability to debug and optimize code for efficient performance

I am looking for an experienced C++ programmer to fix a program that I have written for a remote control using an Arduino and Arduino Shield. The program is working but not as good and reliably as it should be expected. I do have the original source code for it and all the documentation needed. The task is to find the cause of why it is not functioning properly and to make the necessary corrections to resolve the issue or to re-writte it if needed. I would appreciate any assistance to help get the program back to proper functioning. My budget is flexible.

...ESP32 Description: I am looking for a skilled programmer to work on programming an ESP32 device. The project requires the use of the Arduino programming language and should be completed within 2 weeks. Specific requirements: - I have a detailed list of functionality and features that need to be implemented on the ESP32. - Program has to read the data from modbus devices, read the analog input 4-20mA, read the digital inputs, controlling the relay outputs. ESP 32 should connect to the any cloud database by GSM or by LAN/WAN when GSM is not available. More details will be available for selected candidates. - The programmer should be experienced in working with Arduino and have a strong understanding of its capabilities. - Attention to detail is crucial to ens...

Project Description: I am looking for a freelancer who can rewrite an assembly code for the XC888 microcontroller to create a secure wireless communication using RSA on the ESP8684. i have the similar project code in C++ Arduino designed for ATmega microcontroller so only contact me if you know how rewrite the code in assembly to fit with xc888 microcontroller PLEASE CHECK THIS: -the code and presentation for ATmega attached - youtube video explaning the project : The project requires the following specific features: - Encryption and decryption of wireless communication - My preferred programming language for rewriting the assembly code is [insert preferred language] - The deadline for this project is within 2 weeks

I am looking for a developer with intermediate experience in RS485 and Modbus to help me develop a new monitoring system specifically for Huawei inverters. Requirements: - Expert level of experience in...developing monitoring systems for specific inverters Please note that the RS485 protocol documentation is already available, so there is no need for reverse engineering. I would like a simulation model built in an Arduino/Raspberry pi module, in which the following values are requested from the Huawei inverter Modbus: - Power generation and the following value is written to the correct modbus register: - Power curtailment value As stated, the deliverable is a simulation built in one of the simulation environments, as well as the source code for both the Raspberry pi and th...

...seeking a creative and talented designer to help us establish a captivating brand identity. The project involves designing key elements that contribute to our brand's visual presence. Scope of Work: Logo Design: Develop a playful and memorable logo that reflects the essence of our kids' clothing brand. Colors and elements should resonate with both children and parents. Pricelist Label (Hangtag, 700 GSM): Create an eye-catching and informative hangtag design for our clothing items. Incorporate necessary product information and pricing. Shipping Bag (Polyamailer): Design a visually appealing polyamailer that enhances the unboxing experience for our customers. Reflect our brand identity on the bag. Wrapping Paper: Develop a charming wrapping paper design that complem...

I need to create this pulse sensor monitor using arduino UNO 3 I have done it but unable to get the correct code and upload on software. I have the codes but they don't work for some reason I need to find why is it not working. I need help with that

Project Title: Integrate max98357a ...module Description: - The goal of this project if use ESP32 is to integrate the max98357a audio output with the LAN8720 or W5500 Ethernet module or if use Audio UNO is to integrate the max98357a audio output with the W5200. - The client wants to play audio using the input from the Ethernet. - The client prefers to use Arduino or ESP32 for programming. - The project needs to be completed within a week. Ideal Skills and Experience: - Strong knowledge and experience in Arduino programming. - Experience in working with Ethernet modules such as LAN8720 and W5500. - Familiarity with the max98357a audio output. - Ability to integrate the audio output with the Ethernet module. - Efficient time management skills to complete the project within th...

Hi, I'm looking for an experienced electronics engineer with an expertise in Arduino programming to work on my project. The project involves programming Arduino using an intermediate complexity level. My project involves both electronics and mechanical engineering part But my part is only the electrical design I need to design 5 small mirrors (6x6 cm) that will track the sunlight and reflect its light into a certain point above i live in saudi arabia i prefer if you do the project and i collect it if not im welling to see if you can help me doing it

...Collection with Arduino ESP8266 NodeMCU CP2102 Programmable Temperature controller with timer 16x2 i2c display Blynk app settings - Desired functionality: Sensor data collection - Specific sensor type: Temperature sensor - Preferred programming language: Any (C++, Python, or Javascript) Skills and experience: - Proficiency in Arduino programming - Knowledge of ESP8266 NodeMCU CP2102 - Familiarity with temperature sensor integration - Understanding of wireless communication protocols - Ability to collect and analyze sensor data - Experience in home automation projects is a plus The project requires the development of a system that can collect temperature data using a temperature sensor and Arduino ESP8266 NodeMCU CP2102. The ideal candidate should have experience ...

looking for a Web Developer to create a web app that connects to our eJoin GSM router for managing received messages. take a look at: not the same thing but would be similar

I'm looking for an experienced freelancer to write some code for an Arduino project I'm working on. Specifically, I am looking for the code to integrate specific sensors, motor control, and communication with other devices. The sensors I am looking to integrate include access control via WiFi, Bluetooth, keypad, various sensors, RFID, and fingerprint scanning. I have all the components and sensors for this project already, I just need the appropriate code to bring it all together. Any queries or updates about this project will be communicated through WhatsApp as my preferred choice of communication.

...experienced freelancer who can help me with my project involving the Arduino Nano 33 BLE and remote control. Main Purpose of Remote Control: - The remote control will be used to gather information from the Arduino Nano 33 BLE. Specific Functionalities: There is a Bluetooth low energy remote control here For the first I need software for an "Arduino Nano 33 BLE" to readout the pressed keys on the remote control. Goal: At the serial monitor from the Arduino IDE the keys pressed (e.g. "left button pressed") should be shown. Deadline: - The deadline for this project is less than 1 week. Ideal Skills and Experience: - Proficiency in Arduino programming and familiarity with the Arduino Nano 33 BLE. - Experience in developi...

...lines and shapes, and a bold typeface. The design should contain black and white colors that evoke a slightly vintage vibe while also remaining timeless. Creative ideas and clever solutions are welcome. Please include your portfolio when you submit your proposal. General Theme- We offer a unique and different customer experience than a traditional bar setting. Upon entering, customers are given an RFID card that they use to pour their own beer. We encourage creativity and originality! Whether you opt for a minimalist or maximalist approach, the design should resonate with our concept. There's no place like Oz.! File Format: High-resolution JPEG, PNG, and vector file. Submission Deadline: 10-19-2023 Style: - Clean lines and simple yet impactful designs. Color Scheme: -...

I have an Arduino Uno board that I need programmed to create a counter program using a proximity sensor in combo with the corrugations in our steel tube. I would like the program and wiring diagram to also include a reset function that will reset the counter to zero. The program will need to allow trigger values to be set by the user in order to create LED indicators for 6 or more different count values. This project is essentially a basic counter program that will take user input and return corresponding values to be used for counting purposes. The end goal is to have a functional counter program, with an accompanying wiring diagram, that utilizes a proximity sensor and allows for the user to define trigger values for the reset function. We are looking to use an ultrasound sen...

Title: IoT Pump Wireless System Development Requirements: - Remote control capabilities for the IoT pump wireless system - Compatibility with Arduino programming language and platform Ideal Skills and Experience: - Proficiency in Arduino programming language - Experience in developing IoT systems with remote control capabilities - Strong understanding of wireless communication protocols - Knowledge of IoT security measures and best practices Additional Information: - The client does not require support in the installation and testing phase of the IoT pump wireless system.

I am looking for a programmer who can add new code to my existing Arduino code for a simple LED lighting project. The new code needs to have specific on/off timer control functionality, which will be added to my existing code (a state machine with about four states). I would do this myself, but I am a novice and don't have the time needed to finish this. If you are interested, please contact me as soon as possible.

My goal for this project is to automate a specific task using programming with Arduino. I don't have a preferred language but the task involves is of a simple complexity. I need someone who is familiar with Arduino to program a custom microcontroller for my project. The result would be a user-friendly interface and a reliable automation process for my specific task. Thanks in advance for your help!

Please read the requirements document attached below. You will need to program bitmap graphics by constructing arrays. You will display graphics to on oled screen that is 128x64 and have display functionality that is using the mpu6050 accelerometer. Looking to have this arduino sketch completed asap.

I am looking for a skilled and experienced developer who can create a mechanical diagram for my IoT device. The purpose of the device is asset tracking. Specific Features and Functionalities: - I have specific requirements for the device, and I would like the developer to incorporate them into the design. The device will be using a mechanical switch, Passive RFID . Level of Detail: - I would like the mechanical diagram to be detailed with parts, assembly, and material specifications. I will explain the specific requirements to the developer who is selected for the project.

...Goal is to use as much as possible details to identify the position of the device. Ideally a few cm of positioning accurancy. Required skills: - knowledge how to identify high precise position via as much as possible different satelite systems - knowledge how to identify fastly the current position via GSM/LTE positioning - very high knowledge on RTK, AGPS, DGPS, RTCM 3 - very high knowledge on ESP prototyping The current idea is to use ESP8266/ESP32 based devices, along with central managed solutions. generic goal: - identify the current device position as accurate as possible, preferable a few cm - provide well documented code - send position details with accurate time, accuracy of position via

...limitations, this is your specialist approach, in a minimal memory footprint and some percentages of CPU available you are able to create MP4 container conversion for a datapipe in maximal kpbs in minimal network datapipe. Battery will drain if HW available is used more than minimal amount of resources. We need to test the product in order to have certification for products in WIMAX, bands 40 to 80 in GSM, TDMA, CDMA and various flavors of LTE branded networks. Our main HW environments are in Apple, Google, KaiOS products, where we would like to offer a below radar approach, not to be noticed in HW-SW OS resourcing the product in use, while using the bandwidth and prioritizing our software to others in the device while leaving OS functions. If you have experience in music strea...

I am looking for a freelancer to create a TMC2226 library for the NRF52 device. The purpose of using this library is for motor c...a TMC2226 library for the NRF52 device. The purpose of using this library is for motor control. I do not have any specific requirements for the motor control, as standard features are sufficient. However, I do have specific preferences for the programming languages or development environments that the library should be compatible with. I would like it developed with similar features to this Arduino library but ported to the nrf52 devices. Skills and Experience: - Experience in creating libraries for motor control - Proficiency in programming languages and development environments that align with the client's preferences.

I am looking for a programmer who can help me with a project involving 4 stepper motors (28byj-48) using arduino and push buttons. The requirements for this project are as follows: - Stepper motors should be programmed to rotate in both clockwise and counter-clockwise directions. - The motors do not need to have different speeds; a consistent speed is sufficient. - Momentary push buttons will be used to control the rotation of the motors. Ideally, the freelancer should have experience in programming stepper motors and working with push buttons. They should be able to write code that allows for bi-directional rotation and can handle input from momentary push buttons. Attention to detail and the ability to meet deadlines are also important for this project. I have found an existing...

Preciso de ajuda para fazer um projeto utilizando Arduino. Basicamente tenho leds de uma pisca pisca de cascata que gostaria de reaproveitar. São proximamente 8 linhas de 72 LEDs que estão ligados em serie (gostaria de controlar pelo Arduino pelo menos em 4 grupos). A energia na minha região é 220 volts. O O Código do Arduino eu mesmo posso fazer, preciso de ajuda para saber quais componentes eletrônicos preciso usar por exemplo, Qual transistor devo usar? Ponte retificadora? Capacitor? E qual a potencial ou referencia de cada um deles. Gostaria de receber o esquema de como montar

I'm looking for an experienced mobile app developer to get a project implemented for end to end speech encryption (AES) for calls between two android phones (GSM). The level of encryption is required to be advanced and needs to have a user interface for managing the encryption. No additional features are necessary other than basic encryption functionality. If you have experience with this type of project and you think you would be a great fit, please submit an application for the project.

More details: What is the desired size of the box? Medium. Basically H 24" D 12" W 12" box with a design bow at the top. Are the electrical components sensitive to heat? I will be installing my own arduino based components What type of material do you prefer for the 3D printing? Any recycled 3d printing filament

...remain constant at 12.5V regardless of input battery voltage 3.(normal power) 4 lanes 12v 3 A each with barrel connectors at the end. 3.1should be able to measure the current consumed in the lane. data of the current consumed to be fed to an arduino input. 3.2should be able to switch on/off using arduino/microcontroller digital signal 4.(PWM power) 3 lanes12v 2A each with rca connectors at the end. 4.1 Each lane recieves a PWM signal from arduino/microcontroller and provide pulsed 12v power 4.2 same as 3.1 4.3 same as 3.2 5. Provide power for arduino/microcontroller Help me to design the schematic and gerber files for printing. If you are bidding for this job, please make sure you let me know how you are planning to implement my requirements in your bi...

I am looking for a skilled web developer to create a website for my GSM shop. The main purpose of the website is to serve as both an e-commerce platform and an informational hub for customers. - The website should have a product listings feature, where customers can browse and purchase our GSM products. - Contact information should also be easily accessible, allowing customers to get in touch with us for inquiries or support. - Additionally, I would like to have a blog section on the website, where I can share news, updates, and articles related to GSM technology. Ideal Skills and Experience: - Experience in developing e-commerce websites, preferably using the Shopify platform. - Proficiency in designing and implementing product listings features. - Knowledge of int...

I am looking for a Flutter developer with experience in UART serial Communications. The specific UART device I need to communicate with is ESP32, Arduino, or Raspberry Pi. Skills and Experience: - Proficiency in Flutter development - Experience in UART serial Communications - Familiarity with ESP32, Arduino, or Raspberry Pi The successful freelancer should include their experience in their application, showcasing their past work and relevant projects. The expected duration of the project is less than 1 month.

I have a product using a shield that I designed which goes over an Arduino Mega 2560. I would like to have this redesigned to have a single board which uses the ATMega chip. I would rather keep things as they are as much as possible as the whole thing is already debugged and working well. It also uses a DS3231 real time clock, which I would also like to be embedded directly to the system. I have Eagle schematics, but my shield circuit is rather simple - it is basically four 28BYJ-48 drivers + a RTC on a single shield. I would like to know about past projects and your general experience. If there are opportunities for improvements I'd be happy to hear them. I would like to have a design which should be ok for FCC and ULC certification.

I am looking for a developer who is experienced in RFID UHF technology to work with me on a large project. The purpose of the project is for personal use and the program needs to be developed from scratch. My primary objective for this program is to use RFID UHF technology for identification and tracking purposes. I'm looking for someone who has expertise in managing and programming RFID UHF technology in order to help me develop my project. I'm excited about this opportunity to work with someone who can provide their experience and expertise in this field in order to create something unique and special.

I am looking for a freelancer who can help me with a 36 Volt LED project. I need both hardware design and software development expertise to modulate the LED with a mobile device. Functionality: - The LED should be modulated at a specific interval - Proficiency in software development for LED modulation. - Experience with Wi-Fi communication. - Design the hardware configuration including the arduino, raspberry pi or whatever controller Hardware Design: Use an LED like this:

Need Simple arduino ide code for BDK-ATxx4-MSTP() for bacnet communication object need is -device -ai1>read only>room temp>any pin free -av1>r/w>room setpoint -bv1>r/w>valve relay>any pin free -any other mandatory object Instance will be mac adress+ 10000…. Ie if Mac Is 45 instances will be 10045 Av2 will be the instance value that will be available to be customized if bv2 is enabled

My project is the development of a Modbus communication client system on an Arduino microcontroller. The required Modbus communication uses TCP/IP protocol, and I am looking for an implementation that reads and writes from the input register and holdings register. I will be communicating with only one Modbus device. This project requires extensive knowledge and understanding of Modbus communication, as well as its applications. I am looking for a qualified engineer to develop a comprehensive solution that meets my needs and specifications. If the engineer has expertise in the Arduino microcontroller and experience working with Modbus protocols, that would be an additional plus. The engineer should work closely with me and provide regular updates. Furthermore, the engineer sh...

...baitboat autopilot system with specific requirements. The ideal candidate should have experience with microcontrollers and be familiar with the Arduino platform. Requirements: - Range: The desired range for the baitboat autopilot system is approximately 300 meters. - Microcontroller: The system should be developed using Arduino/STM32. - Functions: In addition to basic autopilot functions, the system should include GPS navigation capabilities. The autopilot system should be able to control the movement of the boat and have the ability to release bait automatically. Skills and Experience: - Proficiency in microcontroller programming, specifically Arduino/STM32. - Experience with GPS navigation integration. - Knowledge of baitboat autopilot systems and their functi...

I am looking for an experienced embedded system developer to create a BLDC motorcontroller using Arduino, with the aim of completing it in less than a month. I am looking for someone with extensive knowledge in the use of microcontrollers and embedded systems, and the ability to accurately complete the project in the specified timeframe. The main purpose of the embedded system is to control different devices in a certain environment, so the person hired must have the expertise necessary to make that happen. If you have any questions or would like to discuss the project further, please don't hesitate to get in touch.

I'm looking for an Arduino code to connect an Arduino Uno or Nano to Arduino Cloud through an Ethernet shield. The primary purpose of this connection is to enable remote control of the board over the cloud. I'm unsure of the exact ethernet shield needed for the job, so recommendations would be much appreciated. The board I plan to use for this project is an Arduino Uno.

I have an Arduino Uno and L293D motor shield. I have a 12v, 100 rpm DC motor and 2 180 deg 5v servos. I want to be able to operate the DC motor at a constant speed in both the clockwise and counterclockwise direction for a full 360 degs, stopping and starting at any point during the rotation. Each of the 2 servos also need to function in the same manner as the DC motor although their range of motion will be limited to less than their full 180 deg of travel. Also, the H/w list includes 2 2-axis joysticks and 12v to 5v converter in addition to the Arduino Uno, L293D motor shield, dc motor and 2 servos Because of this I’ll need the ability to set limits of travel in each direction of the servos so they won’t hit up against any physical part. I also want to b...

I am looking for a skilled app developer to create an app that allows me to receive GSM phone calls remotely via the internet. The following are the requirements for the project: Operating System Compatibility: - The app should be compatible with the Android operating system. Preferred Programming Language: - There is no preferred programming language for the app development. Features: - The app should solely focus on the functionality of receiving phone calls remotely via the internet and should not include any additional features. Ideal Skills and Experience: - Experience in developing Android apps. - Proficiency in Java or Kotlin programming languages. - Strong knowledge of internet connectivity and remote communication protocols. Basic requirements for the project with exam...

...developer who can port my current Arduino code from a UDP connection to MQTT. I want to replace the UDP entirely and maintain the existing functionality while adding MQTT. I have the Main Arduino sketch that connects to the server via UDP. This must now be changed and delete all references of UDP and change with MQTT. I have a sample sketch that I have written which connects to my server with MQTT. This must now be ported over to the Main sketch. I have a Mosquitto Broker running on my server. Skills and Experience Required: - Proficiency in Arduino programming - Experience with MQTT protocol - Knowledge of server communication - Understanding of device-to-device communication - Strong problem-solving skills Tasks to be completed: - Port the existing Arduino...

Tramite Arduino desidero comandare un attuatore elettrico al superamento di alcune soglie impostate per alcuni sensori: accelerometro, temperatura, umidità. l'attivazione dell'attuatore deve avvenire con un ritardo impostato.

I'm looking for a Windows application that can read, write and erase RFID tags. This app is for personal use, but I have a rough idea of the layout and specific functionalities in mind. The application should be able to read, write and erase RFID tags efficiently. The app should also provide an intuitive and reliable user interface with a clean design. I would like it to work in the following way. -In an Excel sheet, in column A there would be the name of the article and in column B the plot of the tag which identifies the article. Once we run the app, we will select a box in column A (example box a6) and the app will tell us what to tag the antenna. This will record the plot of the box in column b (in example b6) and will ask us to remove the chip. It will automatical...

I am looking for a fre...freelancer who can create a standalone GSM Data receiver hardware that will connect with ATM/POS machines. The primary function of the hardware will be to receive and store data. Ideal Skills and Experience: - Experience in developing GSM Data receiver hardware - Knowledge of ATM/POS machine connectivity - Ability to create a standalone device - Proficiency in data storage and retrieval - Familiarity with GSM technology and protocols The hardware should be able to connect with any ATM/POS machine, regardless of the brand or model. The freelancer should have the ability to develop the necessary software to facilitate the data reception and storage. The project requires a freelancer who is detail-oriented, reliable, and experienced in working ...

...database to be connected ( I mean if our customer wants this application needs to be connected with their database only), A.2- Api to connect our application to the customer database directly. B. Bulk Attendance IN/Out for Employee/Student by face recognition of more than one person at a time and its data should be saved in database on real-time. C. Single Attendance in/out using Biometric cum RFID Reader - should also be allowed to save its data directly into the database on real-time. D. Attendance punching related analytical reports. E. Punching Data needs to be synced in MS SQL Server Database (IP Address host setting should be in admin panel). F. Mobile App with Sing-In/ Sign Up and Dashboard (Like Whats app application where registered user can see his/her p...

I am looking for a Python expert with expertise in IOT, specifically in the areas of Bluetooth and Wi-Fi. The ideal candidate should have experience with MQTT as the preferred communication protocol for the project. The expected data load for this project is heavy. This project involves syncing M2M data with IOTDB. The project requires someone with strong Python skills and experience in handling large data loads in an IOT environment. Budget <$200

Please read all requirement carefully I am looking for a freelancer who can assist me in setting up client-host communication using NRF24L01 modules. Full project requirements are as follows: 1. One NRF24L01 module setup as host to receive data from ...on these modules I believe you have all required hardware, else arraigning hardware is your responsibility Don'ts: - Do not use ChatGTP for writing code for this project - Please do not use MPLAB code configurator, it creates lots of extra junk which is additional burden for uC - Project should not be tested on any simulator, you must test project with real components. - I will not consider Arduino environment Deliverables: You will provide me code that I will test on my hardware, once function is confirmed I will releas...